Nvidia GeForce MX130 vs MX150 Comparison Review

In this article, we compare the GeForce Mx130 vs MX150 performance for laptop users. Both cards are found on the lower end of Nvidia’s GPU and are not marketed as gaming graphics cards. However, they can handle less demanding games at low settings and resolution. Read on to find out how they perform compared to each other.

Nvidia GeForce MX130 Specs

The MX130 is just a rebranded Maxwell-based GeForce 940MX. It was released in November 2017 for use in medium-sized laptops. The GPU is a renamed 940MX because it does not offer any increase in performance over its predecessor. It is also not as efficient as the MX150 because it is manufactured in the 28 nm process and not 14 nm as is the MX150.

The MX130 is equipped with 384 shader processing units – same as the MX150 but clocked lower. It has a core clock speed of 1122 MHz base, with the boost clock running up to 1242 MHz. It offers up to 29.81 GTexel/s texture fill rate and floating point performance of 953 flops.

The MX130 is fitted with a maximum of 2 GB GDDR5 or the slower DDR3 memory, connected using a 64-bit bus. The memory clock speed is 5012 MHz and the total bandwidth is 40.1 GB/s. It also supports OpenGL API version 4.6 and DirectX 12.0 (11_0).

Nvidia GeForce MX150 Specs

The MX150 is a Pascal-based successor to the previous generations 940M/930M GPUs that were popular in laptops. It is based on the same GP108 GPU chip as the Maxwell-based MX130 but it is manufactured in 14 nm process compared to the latter’s 28 nm using the newer Pascal architecture. Therefore, it is expected to be more efficient than the MX130. The MX150 is also the official successor to the GeForce 940 MX.

It offers the same 384 shaders processing units as the MX 130 in this GeForce MX130 vs MX150 comparison. It is set at a base frequency of 1227 MHz and a boost of up to 1468 MHz. it is fitted with a maximum of 4 GB of the faster GDDR5 memory using a 64-bit interface. The memory runs at 6008 MHz and the total bandwidth is 48.06 GB/s.

It supports OpenGL 4.6 and DirectX 12.0 (12_1) APIs. The specifications of the MX150 show it has greater processing capabilities than the MX130.

Benchmarks comparison

According to TechnicalCity’s non-gaming benchmarks, the MX150 scores 12.5% higher than the MX130 in Passmark benchmark and 50% better in Unigine Heaven 3.0.

In GTA V tests by LaptopMedia, the MX150 averages at 103 fps in low settings at 768p and 43 fps in medium settings and 21 fps in high settings. The MX130 averages at 80fps in low settings at 768p, 37 fps in medium and 11 fps in high settings.

Verdict

Both graphics cards are not suitable for 1080p gaming, however, they are able to run less demanding games at high settings in low resolutions. The MX150 has greater processing power than the MX130 and its Pascal architecture and fine manufacturing process make it more efficient. This makes it the best card to go with. Hope this GeForce MX130 vs MX150 comparison was helpful, ask any question in the comments.